View source for KIND Interior

[[KIND Interior]] provides the basis for a building or vehicle interior, with or without control levers and dials.

This asset type inherits all mesh display characteristics, and adds interior-specific functionality such as control levers.

==KIND Hierarchy==
===Parent Classes===
* [[KIND Mesh]]
===Child Classes===
* ''none.''

==Supported Tags==
Each interior asset supports the following tags. Each tag is shown here with its default value.


 kind "interior"
 [[%22cameralist%22_Container|cameralist]]
 {
   camera0                               0,0,0,0,0
 }
 [[%22soundscript%22_Container|soundscript]]
 {
 }
 cameradefault                           0
 cabin-visible-from-outside              0
 outside-visible-from-cabin              0
 [[%22mesh-table-int%22_Container|mesh-table]]
 {
 }


====cameralist====
:Type: [[%22cameralist%22_Container|CameraList Container]]
:Desc: Lists the different camera view positions and orientations this interior has.
====soundscript====
:Type: [[%22soundscript%22_Container|SoundScript Container]]
:Desc: Details sounds that a cab interior can produce.
====cameradefault====
:Type: Integer
:Desc: Defines which of the cameras in 'cameralist' is the default camera (the one selected when the user first goes into cab view mode).
====cabin-visible-from-outside====
:Type: Boolean
:Desc: If true, makes the cab mesh visible from the outside view.
This is intended for objects with simple but obviously visible cab controls that are not enclosed - e.g. the controls to operate a transfer table. It would be far too much of a performance impact to use this on locomotive models.
====outside-visible-from-cabin====
:Type: Boolean
:Desc: If true, makes the loco body mesh visible while in the cab interior view.
While using this on a traincar is not considered problematic from a performance perspective, please note this will require a very carefully designed cab and loco asset - both the inside of the loco mesh and the cab interior will be visible at the same time, and unless done very carefully, this is likely to cause problems.
====mesh-table====
:Type: [[%22mesh-table-int%22_Container|MeshTable(Interior) Container]]
:Desc: All the meshes for the cab interior (the shell itself, along with all the controls and gauges) are listed here. A mesh table for an interior has a number of additional options that a normal mesh table does not.

==Example Config.txt==
Sample [[config.txt file]] for a interior asset, with the Standard Tags excluded for brevity:


 kind                                    "interior"
 
 cameralist
 {
   camera0                               -1.236,0.173,0.392,0.511,-0.155
   camera1                               -1.278,-0.176,0.392,0.511,-0.155
   camera2                               -1.247,0.344,0.52,6.708,-0.403
   camera3                               -0.113,0.965,0.52,6.312,-0.377
   camera4                               1.35,0.15,0.52,5.71,-0.265
   camera5                               1.374,0.208,0.205,6.048,-0.06
   camera6                               -0.754,0.926,1.011,6.636,-0.516
   camera7                               -1.293,0.449,0.459,6.757,-0.342
 }
 cameradefault                           0
 
 mesh-table
 {
   default
   {
     mesh                                "c_interior.im"
     auto-create                         1
   }
   
   wheelslip_light
   {
     kind                                "light"
     mesh                                "wheelslip_light.im"
     auto-create                         0
   }
   
   bptrainbrakepipe_needle2
   {
     kind                                "digital-dial-prs"
     mesh                                "brakeneedle.im"
     att                                 "a.brakepipe2"
     limits                              0,55
     font                                "arial"
     fontsize                            0.007
     fontcolor                           80,240,120
     auto-create                         1
   }
   
   speedo_needle2
   {
     kind                                "digital-dial-spd"
     mesh                                "brakeneedle.im"
     att                                 "a.digispeedo"
     limits                              0,55
     font                                "arial"
     fontsize                            0.01
     fontcolor                           0,0,0
     auto-create                         1
   }
   
   throttle_lever
   {
     kind                                "lever"
     mesh                                "throttle.im"
     att                                 "a.throttle"
     limits                              0,8
     angles                              0,1.69
     notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
     notchheight                         1,2,2,2,2,2,2,2,1
     radius                              0.35
     mousespeed                          -1
     auto-create                         1
   }
   
   dynamicbrake_lever
   {
     kind                                "lever"
     mesh                                "dynamic_handle.im"
     att                                 "a.dynamic"
     limits                              0,2
     angles                              0,-1.69
     notches                             0,1
     notchheight                         0.1,1
     mousespeed                          -1
     radius                              0.35
     auto-create                         1
   }
   
   trainbrakelap_lever
   {
     kind                                "lever"
     auto-create                         1
     mesh                                "trainbrake_handle.im"
     att                                 "a.trainbrake_handle"
     limits                              0,4
     angles                              0,-2
     notches                             0,0.25,0.5,0.75,1
     notchheight                         2,2,2,2,2
     mousespeed                          1
   }
   
   independantbrake_lever
   {
     kind                                "lever"
     mesh                                "indy_handle.im"
     att                                 "a.ind"
     limits                              0,32
     angles                              0.94,0
     notches                             0,0.5,1
     notchheight                         1,1,1
     radius                              0.35
     mousespeed                          1
     auto-create                         1
   }
   
   flow_needle
   {
     kind                                "needle"
     mesh                                "flowneedle.im"
     att                                 "a.bpflow"
     limits                              0,1050
     auto-create                         1
   }
   
   bplocomain_needle
   {
     kind                                "needle"
     mesh                                "brakeneedlered.im"
     att                                 "a.mainres"
     limits                              0,1240
     auto-create                         1
   }
   
   bploco_equaliser
   {
     kind                                "needle"
     mesh                                "brakeneedle.im"
     att                                 "a.eqres"
     limits                              0,1240
     auto-create                         1
   }
   
   bptrainbrakecylinder_needle
   {
     kind                                "needle"
     mesh                                "brakeneedlered.im"
     att                                 "a.brakecyl"
     limits                              -50,1390
     auto-create                         1
   }
   
   bptrainbrakepipe_needle
   {
     kind                                "needle"
     mesh                                "brakeneedle.im"
     att                                 "a.brakepipe"
     limits                              0,1240
     auto-create                         1
   }
   
   speedo_needle
   {
     kind                                "needle"
     mesh                                "speedo_pointer.im"
     att                                 "a.speedo"
     limits                              0,43
     auto-create                         1
   }
   
   ampmeter_needle
   {
     kind                                "needle"
     mesh                                "needleamps.im"
     att                                 "a.ampmeter"
     limits                              0,1700
     angles                              0,3.02058
     auto-create                         1
   }
   
   reverser_lever
   {
     kind                                "lever"
     mesh                                "reverser_handle.im"
     att                                 "a.throttle01"
     limits                              0,2
     angles                              -0.55,0.55
     notches                             0,0.5,1
     notchheight                         1,1,1
     mousespeed                          -1
     auto-create                         1
   }
   
   right_sliding_window
   {
     mesh                                "window1.im"
     auto-create                         1
     att                                 "a.window1"
     att-parent                          "default"
     limits                              0,1
     angles                              0,-0.009
     notches                             0,1
     notchheight                         1,1
     kind                                "lever"
   }
   
   right_sliding_window2
   {
     mesh                                "window2.im"
     auto-create                         1
     att                                 "a.window2"
     att-parent                          "default"
     limits                              0,1
     angles                              0,0.009
     notches                             0,1
     notchheight                         1,1
     kind                                "lever"
     mousespeed                          -1
   }
   
   left_sliding_window
   {
     mesh                                "window3.im"
     auto-create                         1
     att                                 "a.window3"
     att-parent                          "default"
     limits                              0,1
     angles                              0,-0.009
     notches                             0,1
     notchheight                         1,1
     kind                                "lever"
     mousespeed                          -1
   }
   
   left_sliding_window2
   {
     mesh                                "window4.im"
     auto-create                         1
     att                                 "a.window4"
     att-parent                          "default"
     limits                              0,1
     angles                              0,0.009
     notches                             0,1
     notchheight                         1,1
     kind                                "lever"
     mousespeed                          1
   }
   
   light_switch
   {
     kind                                "lever"
     att                                 "a.hdlt"
     mesh                                "hdltswtch.im"
     limits                              0,1
     angles                              0,2
     notches                             0,1
     notchheight                         0.1,0.1
     mousespeed                          -1
     auto-create                         1
   }
   
   horn
   {
     kind                                "pulllever"
     mesh                                "horn.im"
     att                                 "a.horn"
     auto-create                         1
     angles                              0,-0.55
     limits                              0,1
     mousespeed                          -1
     radius                              -0.02
     notches                             0,1
     notchheight                         0,0
   }
 }

==Downloads==
''Attach sample files here?''

==Categories==
[[Category:Asset KIND]]