SAR Scenario Paratoo Mixed Passenger Freight

Peterborough-Paratoo Mixed Passenger & Freight
Mixed passenger and freight run from Peterborough to Paratoo.

---

Each location in the layout has a detailed set of track diagrams that provide the following information:- the names of the tracks, sidings and loops the location of various facilities - stations, turntables, water columns, coal stages, engine sheds, active industries the names of active industries and their products and consumables the names and locations of trackmarks for Drive To and Drive Via commands the names, properties and locations of track switches and lists of switch sets for particular movements Enhanced Interlocking Tower paths for those locations that have EITs To display the location data click the graphic here or in the text below, or go to the bottom of the page for all the session links (links will open in this window).

Duration:	1 hour 40 minutes
Loco:	SAR T 202 on Peterborough Car Siding Other Unrostered Locos: SAR T 23 on Peterborough Depot Siding 1 SAR T 233 on Peterborough Depot Loco Road 1 SAR 407 on Peterborough Depot Repair Shop Road 4
Consist:	Attached to SAR T 202. 1 Kuranda BL1 coach, 3 QLX wagons, 2 MTW flat wagons, 1 DB Guard Van. Each freight wagon has its destination as part of its name e.g. "QLX Nackara" indicating it is destined for Nackara.
Getting Started: The first step is to pause the session by pressing the P key. Next locate your loco. Either:- Open the Finder (press CTRL-F) and type, in the name field, the name of the loco. For example SAR T 202 (or just T 202 should be enough). Click the tick icon, OR Open the Driver List (bottom left of the screen) and select the loco from there - click the drivers Eye icon to jump to the loco. Take a few moments to get your bearings. Use the (this link will open in this window) and click on Peterborough to load its location details and track plans. The Error creating thumbnail: /bin/bash: line 1: /usr/bin/convert: No such file or directory Error code: 127 tab will give you the EIT Paths that are available if you wish to use them. The Error creating thumbnail: /bin/bash: line 1: /usr/bin/convert: No such file or directory Error code: 127 tab will give you the location and names of the invisible Track Marks for Drive To commands. The Error creating thumbnail: /bin/bash: line 1: /usr/bin/convert: No such file or directory Error code: 127 tab will show the names and locations of all active industries and their commodities. The Error creating thumbnail: /bin/bash: line 1: /usr/bin/convert: No such file or directory Error code: 127 tab will give the names and locations of all junction switches as well as some switch sets you may want to use. Each location page has a direct link to the next location page, in all directions, so you can explore along the route. When you are ready to start, reload the Peterborough Base Session page (click the Scenarios button on your current location page) and select this Scenario again or just use the Back button on your browser - whichever is quicker. Switch back to TRS19 Driver and press the P key to start the session.
Tasks: Reverse the train out of the siding and onto the station line. Pull the train forward into Peterborough Station stopping with the passenger car alongside the station building. Depart Peterborough at 08:06 and proceed to Paratoo stopping at Ucolta, Oodla Wirra and Nackara. At each stop place the passenger car alongside the station building. Detach and shunt wagons at each location as required. QLX wagons to the goods sheds, MTW flat wagons to the goods cranes. Leave each wagon at its unloading point. At Paratoo coal and water the loco as required. Option: Return the train to Peterborough collecting the empty wagons along the way.
Driving Notes: The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop. Enhanced Interlocking Towers with set paths are available for your optional use at Peterborough (departure) and Paratoo (arrival). Details of all available EIT Paths are provided in the Error creating thumbnail: /bin/bash: line 1: /usr/bin/convert: No such file or directory Error code: 127 tab at each location with EITs. Click for details. Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to  Industry  commands. Details of all available Trackmarks and Industries are provided in the Error creating thumbnail: /bin/bash: line 1: /usr/bin/convert: No such file or directory Error code: 127 and Error creating thumbnail: /bin/bash: line 1: /usr/bin/convert: No such file or directory Error code: 127 tabs at each location. Click for details. Manual (no AI) driving is possible. For those locations without home or approach semaphore signals, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Details on all switches and suggested switch paths are provided in the Error creating thumbnail: /bin/bash: line 1: /usr/bin/convert: No such file or directory Error code: 127 tab at each location. Click for details.

---

Links: All links will open in this window
Session Scenarios List	Location List	Error creating thumbnail: /bin/bash: line 1: /usr/bin/convert: No such file or directory Error code: 127 Rolling Stock	Error creating thumbnail: /bin/bash: line 1: /usr/bin/convert: No such file or directory Error code: 127 Active Industries

---

This page was created by Trainz user pware in February 2021 and was last updated as shown below.

---